Output
Sine tone; frequency, Hz; stereo routing
UserBenchmark / All Tools / Headphone Test
Audio
Headphone Test
Check left, right and centered headphone audio.
Free to useNo downloadNo sign-up
Headphone Test · At a glance
Quick answer: Check left, right and centered headphone audio. A centered cue should be heard through both channels.
Headphone Test
The test loads when you open it. Device access is requested only after you choose to start.
Detailed guide
How to use this tool
- Wear the headphones in their marked orientation.
- Play left, right and center quietly to inspect routing and balance.
Input
Explicit playback and a low output volume
Browser requirement
Web Audio; AudioContext
Processing
Runs on your device; no tool-result upload
How it works and what the result means
A generated sine wave helps check routing and audibility. Speaker, headphone and audio hardware response strongly influence what you hear; the tool cannot measure response without a calibrated recording chain.
Reading the result
A centered cue should be heard through both channels. Perceived balance can also depend on fit, output settings and the source chain.
What to check next
Inspect mono accessibility mode and channel balance if every cue sounds the same. Reconnect the plug fully when using a wired headset.
Very high or low frequencies may be inaudible on working equipment. Do not increase the volume to chase an inaudible tone. This is not a hearing diagnosis.
Frequently asked questions
Can this measure headphone sound quality?
It checks routing and tone audibility. It does not measure distortion, isolation or an objective physical frequency response.
How do I start the Headphone Test?
Lower your volume first. Select a channel and frequency, then start a quiet tone. Stop playback before changing devices.
Does this tool require a download or an account?
No. Open the interactive tool above in a modern browser. The instructions and explanations are available even with JavaScript disabled; running a test needs JavaScript.
Why can two attempts give different results?
Power settings, background tasks, browser scheduling, operating-system input processing and device settings affect measurements. Compare repeated attempts with identical settings rather than the single highest score.